Posts

Showing posts from February, 2017

Project P19 | Bodice Emrboidery

Image
I don't have a lot to share what I've been doing for Padme's Picnic Dress, or Project P19, at the moment because most of what I've done so far is embroidery, but I wanted to post about what I have done so far.

I finished drafting the bodice on my sewing form (sorry, I forgot to take pictures of that) and patterned it a few weeks ago. It's a pretty simple design, consisting of a total of 9 panels. I cut my pattern pieces of 2 layers; canvas for the structured layer and a crinkled nylon chiffon for the top layer. I will also be cutting these same pieces out of my lining fabric, but I don't have any on hand at the moment.




Once all my pieces were cut I flatlined the top layer to the canvas by surging around the edges. This was a little tricky with the chiffon since it's so light weight, but I was able to get it done fairly well considering I've never really worked with sheer fabrics before.


The next step was figuring out the embroidery pattern. Only two of…

Project P19 | Costume Analysis

Image
I feel like I've been jumping all over the place with my costumes lately. I'm at different places with each costume that I'm working on and when I'm stuck waiting on something (whether it be fabric, inspiration, or just procrastinating) I still have the need to be working on something which usually means starting a new project. In this case, it's my next Star Wars Cosplay, Padme's Picnic Dress from Attack of the Clones.

This costume was referred to as P 19 during production, which is what I've come to refer to it as, as that's shorter than Padme's Picnic Dress. ;D


I started the mock up several months ago (I think back in November) because I didn't have anything better to do and I was experimenting with new-to-me drafting techniques. However, I didn't finish the mock up and pattern it until about a week ago. I also decided on this particular dress because near the end of summer I found most all of the material's I need at Goodwill for abo…

The Ugly Puffer

Image
January came and went and I barely did any sewing, which isn't the way I had hoped to start the year. I worked on a few mock-ups, sewed a few 18th century petticoats, and made an ugly puffer.

What might you ask is an ugly puffer? It's this thing.


It lives up to it's name; it's ugly and it's puffy. But it works beautifully!

I'm not sure how historically accurate it is (full quilted petticoat's were worn in colder months, but I haven't seen any half petticoat's like this before), but it gets the job done. I first came across this wonderful little piece of fluff from Lauren at American Duchess, but I decided to make one after a fellow costumer on Instagram suggested it to add some volume for my petticoats. The Ugly Puffer is great for a ton of era's: 18th century, 1830's, 1840's, etc...

Here's a before and after the Ugly Puffer with my 18th C. Petticoat. I have two petticoats, both made of cotton and roughly the same same size each plea…